When laying steel wire mesh, according to the laying method from the middle to both sides in turn. Wall plastering engineering use wire mesh material is generally two kinds: one is electroplating, the other is hot dip galvanized. The former has low cost and a wide range of use. The cost of hot-dip galvanized material is slightly higher than that of electroplating, and the cost is high and the life is good to prevent rust. Hot dip galvanizing is in the case of heating plating. After the zinc is melted into liquid form, the base metal is immersed in it so that the zinc interpenetrates with the base metal and binds so tightly that there are no other impurities or defects left in the process.
- Because of the beauty, art, or in specific severe corrosion environment, galvanized layer can be applied to the above paint duplex system, as long as the paint system selection is correct, easy construction, its anticorrosion effect is 1.5~2.5 times better than the single paint and hot dip zinc life combined. With zinc layer to protect iron and steel, in addition to hot dip galvanizing method, there are several other methods, generally widely used, corrosion prevention effect is good and good economic benefits, hot dip galvanizing method.
- At present, some manufacturers also use the process of sandblasting equipment for wire pretreatment, sandblasting process is carried out in the sandblasting room, but in the process of sandblasting, dust will permeate the whole sandblasting room, produce a lot of dust that is not easy to collect, and if the dust will be discharged at will.
- If adult dogs touch noses with puppies out of affection, adult dogs touch noses with dogs that have more meaning in life. For example, dogs can touch their noses to communicate where food is safe and whether people or other animals are in danger.
The characteristics of these cages are small, light, easy to carry and easy to clean. For small animal cage, the wire diameter of the general iron wire is not very large, the thickness of the plastic is relatively thin, so the use of the time can not be “violence”, otherwise the cage in the “destruction” will occur under the welding or plastic crack.
Compared with other galvanizing processes, the cleaning requirements for low carbon steel wire before galvanizing are low. However, under the current trend of increasing the quality level of galvanized layer, some pollutants brought into the plating tank are obviously harmful. Because cleaning galvanized coating wastes a lot of time and reduces the production, it is very important to properly clean and effectively rinse the substrate before electroplating.
2. Eliminate the caked zinc residue at the zinc liquid surface
The welding core is the metal core of the electrode. In order to ensure the quality of the weld, there are strict regulations on the content of various metal elements in the weld core. In particular, there are strict restrictions on harmful impurities (such as sulfur and phosphorus), and the quality of the weld core metal should be better than that of the base metal. Arc welding cannot be carried out on a smooth rod without a coating. This is because the arc stability is very poor, splashing is very large, and the weld is not well formed. After long-term practice, it is gradually found that the performance of the electrode is greatly improved by coating the welding core with some mineral raw materials (i.e. electrode coating). (1) Ensure stable arc combustion, so that the welding process is normal. (2) Using the gas produced after the drug skin reaction, protect the arc and the molten pool, prevent the harmful gases in the air (such as nitrogen, oxygen, etc.) from invading the molten pool, such as these gases will cause cracks and pores in the welding material, so that the welding can not achieve the ideal effect. (3) After the drug skin is melted, slag is formed, which covers the weld surface to protect the weld metal, make the weld metal slowly cool, help the gas escape, prevent the generation of pores, and improve the structure and performance of the weld. (4) After melting, various metallurgical reactions will be carried out, such as deoxygenation, sulfur removal, phosphorus removal, etc., so as to improve weld quality and reduce alloying element burning loss.
- The new weaving machine can weave 3.5m wide, 5cm narrow, can be customized according to customer requirements.
- The quantity should be the same as the contract, cold drawing, carefully record the quantity of each specification and packing method. If there is a label, check whether the label is correct and take a photo to confirm. Each roll of iron wire is fastened with galvanized packing tape, and then tightly bound with a very strong transparent plastic bag. The outer layer of coated iron wire is wrapped with white braided cloth, and the outer layer of galvanized iron wire is wrapped with green braided cloth, so as to ensure that the packaging will not be lax in the transportation process. One end of the wire must be clearly marked and the other end left on the outer layer for easy connection by other wires.
There are three main factors affecting corrosion of stainless steel pet cages in Dalian:
- Atmospheric relative humidity At the same temperature, the percentage of atmospheric water vapor content and its vapor saturation content is called relative humidity. Below a certain relative humidity, the corrosion rate of metal antirust oil is small, while above this relative humidity, the corrosion rate increases sharply.
- In order to figure out how many meters per kilogram of barbed rope, you also need to find out what type of barbed rope is, because different models will directly affect its weight.
Hot dip galvanized welding mesh is made of iron wire, processed by precision automatic mechanical technology. The mesh surface is smooth, the structure is strong, and the integrity is strong. Even if the local cutting or local pressure is not relaxed, the hot dip zinc is processed. Hot dip galvanized welding mesh surface white color, thick zinc layer, high zinc content at the solder joint, uniform mesh, flat mesh surface, solder joint tensile resistance, high corrosion resistance. It has the advantages that ordinary barbed wire does not have.
- If the requirements are not high, and the ventilation is good, and relatively dry place, it is recommended to use electric galvanized barbed rope, because the price of this product has a certain advantage, for ordinary users, this is a more appropriate product.
Post time: 26-10-22The cage door must be open so that the puppy can get out at any time. Once the puppy gets used to the dragon, it will go in without you urging it. Close the door for a few minutes when the puppy is having fun. But keep the crate in a busy area of your home, such as the kitchen. The puppy is relaxed and asleep in the safety of its cage. Cage trained puppies should not be caged for more than two hours during the day (unless you have to, but as soon as you get home from work let the puppy out). After getting used to the crate, the puppy is willing to stay in the playpen. Some dogs can’t stand the small space in a crate, but puppies are less likely to have this problem.
Post time: 14-12-22The size of the dog cage is generally small, suitable for indoor small dogs, the dog cage is easy to carry, go out to compare the use, folding dog cage high strength steel wire and steel pipe material, outer spray treatment. Strong texture, excellent rust prevention performance, dog cage inside the tray, can be drawn out, convenient cleaning dog urine and feces, folding, dog cage suitable for family and pet shop multi-pet dog breeding.
- Because the bundled galvanized wire is endowed with pre-tension, so it has the excellent characteristics of low relaxation value, small stress loss, good stability after loading, not easy to deformation, no fracture, strong elasticity, ordinary steel lines and rebar is difficult to match. The use of advanced galvanized finishing process, therefore, the use of hot-dip galvanized steel wire construction, not only good anti-corrosion performance, and beautiful generous. The product has the characteristics of smooth surface, high dimensional precision, good uniformity of zinc layer and firm adhesion.
Zinc pot workers should be determined to do duty and responsibility. Do not leave the post without leave, always observe the change of hot plating wire galvanized layer, and according to the analysis results, master the asbestos block gap friction, how long it takes to press, replace the pressing face; Adjust the working face; Until all four faces of the asbestos block are used up, maintenance workers can continue to use the asbestos block after repair when necessary to reduce the consumption of asbestos block.
Electric galvanized shaft wire direct selling is in the plating tank through the current unidirectional zinc gradually plated on the metal appearance, the production speed is slow, uniform coating, thin thickness, usually only 3-15 microns, bright appearance, poor corrosion resistance, generally a few months will rust. Compared with hot dip galvanizing, the production cost of electric galvanizing is lower. The difference between cold galvanizing and hot galvanizing: the difference between cold galvanizing and hot galvanizing is that the amount of zinc is different. They can be identified from the color. The color of cold galvanizing is shiny silver white with yellow. Hot dip galvanizing shiny white.
Barbed rope factory not only provides the sales of blade barbed rope, including the subsequent construction is also contracted, and the construction price is particularly different.
- The design is not only for ease of installation, but also for harsh terrain conditions such as cliffs, with little anchorage and little excavation to achieve a quick and easy installation. Based on the characteristics of heavy hexagonal net twisted-pair structure, it can withstand the impact of falling rock even in the case of wire breakage.